Our El Paso service centre can help you if you have any questions about removing your RAM 1500 spare wheel or if you want to learn more about the process. For additional assistance, you can visit Viva CDJR.

How to Remove Your RAM 1500 Spare Tire

These are the steps to take out the spare tire on your RAM 1500. This is necessary before you attempt to lift the truck.

1. Attach the wheel wrench and the extension tube for the jack.
2. The tube should be inserted through the hole in the lower tailgate between the bumper and the top, and into the winch tube.
3. Turn the wheel wrench handle counterclockwise so that the spare tire is placed on the ground with enough cable slack for you to remove it from the underside of the vehicle
4. Once the spare is free, tilt the retainer at one end of the cable so that it can be pulled through the center of your wheel.

To avoid any loose cables getting tangled, always store the spare tire facing down. The winch mechanism can only be used with the extension tube. Any other tools, such as an air wrench, are not recommended.

Voila! You’re done! Now you can install the spare tire, and remove that flat in no more than a few minutes.

Visit Our RAM Service Center in El Paso For Assistance

If your RAM 1500 spare tire is still not working, you can make an appointment at our El Paso service centre. Contact us Viva Dodge Chrysler Jeep if you have any questions regarding your spare tire, or any of our tire services.